A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
65
smarttech.com/kb/170549
Field
Possible values
Description
target volumecontrol
l
= on
l
= off
Specifies whether volume control is enabled or
disabled.
target cc
l
= cc1
l
= cc2
l
= off
Closed captioning states
current cc
l
= cc1
l
= cc2
l
= off
Closed captioning states
target sysoutputsw
l
= line+spkr
l
= line
l
= spkr
l
= none
Specifies the system output switch
current sysoutputsw
l
= line+spkr
l
= line
l
= spkr
l
= none
Current state of the system output switch
Use the above commands to set the property to an absolute value or to adjust the current value.
E X A M P L E
>get volume
volume=0
>set volume=-10
volume=-10
>set 5
volume=-5
>set volume -15
volume=-20
Network information
Use these commands to set your network information.