SMART FSSBID 100, Инструкция по установке и руководство интегратора, Страница: 18 / 104

8 | A B O U T Y O U R S M A R T M O B I L E S T A N D
1010651 Rev C1
Optional Accessories
Contact your authorized SMART reseller to order any of the following accessory parts.
Optional Laptop Shelf
You can order a dedicated laptop shelf if you want to
connect a laptop computer to your SMART Mobile Stand.
This shelf is designed to mount on either side of your
stand, and features an adjustable tilt angle of up to
35 degrees from horizontal. It telescopes outward to accommodate
flat-panel displays ranging from 50" (127 cm) to 65" (165.1 cm) in size.
For more information on ordering a laptop shelf for your SMART Mobile Stand,
contact your authorized SMART reseller .
Flat-Panel Display Adapter Kits
Some models of flat-panel displays require audio/video adapters, which you can
purchase from your authorized SMART reseller . Your reseller can identify the type
of adapter required for your flat-panel display.
SMART Board for Flat-Panel Displays Interactive Overlay
Adapter Kit (FSSBID 100 Only)
IMPORTANT
If you intend to use a SMART Board for Flat-Panel Displays interactive overlay
with your SMART Mobile Stand model FSSBID 100, you must purchase a
USB B to USB A adapter AD09 (Part No. ADP USB AB) from
your authorized SMART reseller .
Rack Mount Hardware Accessory Kit
If you want to configure your SMART Mobile Stand for a rack mount, you can
purchase a hardware accessory kit from your authorized SMART reseller .
This kit includes 16 rack clips so that you can mount up to four peripheral racks.
Standard Replaceable Parts
If your SMART Mobile Stand requires replacement parts, make sure that the service
technician uses replacement parts specified by SMART Technologies.
To order replacement parts, contact your authorized SMART reseller .