3
Important information
IMPORTANT SAFETY INSTRUCTIONS:
SAVE THESE INSTRUCTIONS
NOTE
Refer to the
illustrated installation instructions
for important
information about installing and setting up the stand.
WARNING
l
Read the following warnings carefully. Failure to read the
warnings below or to follow the installation instructions
included with the stand could result in personal injury or
product damage.
l
DANGER: to reduce the risk of shock, always unplug the
stand from the electrical outlet before cleaning or
servicing the stand.
l
Closely supervise the operation of the stand when it’s
used near children or people with disabilities.
l
Use the stand only for it’s intended use as described in
these instructions. Do not use attachments not
recommended by SMART Technologies.
l
Do not operate the stand if it has a damaged cord or
plug, if it is not working properly, if it has been dropped or
damaged, or if it has been dropped into water. Return the
stand to a service center for examination and repair.
l
Keep the power cord away from heated surfaces.
l
Do not drop or insert any object into any opening.
l
Do not use the stand outdoors.
l
Connect the stand only to a properly grounded outlet.
l
Only use the stand with a nominal 120-volt circuit that has
a grounding plug that looks like the plug in the illustration
below.
l
Only connect the stand to an outlet that has the same
configuration as the plug.
l
Do not defeat the safety purpose of the grounding-type
plug. A grounding plug has two blades or pins and a third
grounding prong. The third prong is provided for your
safety. If the provided plug does not fit into the outlet,
consult an electrician for replacement of the obsolete
outlet.
l
Do not alter or remove the grounding prong from the
power cord.
l
Improper use of the grounding plug can result in electric
shock.
l
Do not use a mains power adapter plug.
l
The stand must be grounded to reduce the risk of electric
shock in the event of an electrical short circuit.
l
The assembly and installation of the stand is intended for
a trained professional.
l
The installer must follow the installation instructions. Not
doing so can result in injury or damage to equipment.
l
Use only SMART-supplied mounting hardware or
hardware that is designed to properly support the weight
of the mounted display and accessories.
l
Use the FSE-410 stand only with displays that measure
between 65" (163 cm) and 86" (219 cm) diagonally and
that weigh between 92 lb. (42 kg) and 200 lb. (91 kg).
Using the stand with other displays might be unstable
and could result in injury.
l
Use the stand only for lifting a display that meets the size
and weight limitations indicated in the product
specifications. Do not use the stand to lift people or
objects.
l
Do not overload the stand with too much weight, as this
can cause injury or damage to the stand.
l
Lock the casters before raising or lowering the stand.
l
Operating the stand can create a hand-crushing or
hand-pinching hazard. To prevent injury, keep hands and
people away from crush and pinch locations on the
stand.
l
Allow adequate clearance above and below the stand to
ensure safe raising and lowering.
l
Do not operate the stand if it is damaged.
l
Do not use the stand near water.
l
Allow only adults who are trained and able to use the
stand safely to operate it.
l
Do not allow children or people who are not able to safely
operate the stand to use it.