SMART fortwo cabriolet, Руководство оператора

Страница: 153 / 196

!
Check the polarity when inserting the
new transmitter battery. You could
otherwise damage parts of the electrical
system. When inserting the batteries,
make sure they are clean and free of lint.
X Insert the new transmitter battery.
X Press both halves of the key housing
together again.
X Check the operation of the remote
control.
Replacing bulbs
About replacing bulbs
Safe vehicle operation depends on proper
exterior lighting and signaling. It is
therefore essential that all bulbs and lamp
assemblies are in good working order at all
times.
Correct headlamp adjustment is extremely
important. Have headlamps checked and
readjusted at regular intervals and when a
bulb has been replaced. Contact an
authorized electric drive smart center for
headlamp adjustment.
G
WARNING
Bulbs and bulb sockets can be very hot.
Allow the lamp to cool down before changing
a bulb. Otherwise you could be burned if you
touch them.
Keep bulbs out of the reach of children.
Halogen lamps contain pressurized gas. A
bulb can explode if you:
R
touch or move it when hot
R
drop the bulb
R
scratch the bulb
Wear eye and hand protection.
i
If the headlamps are fogged up on the
inside as a result of high humidity,
driving the vehicle a distance with the
lights on should clear up the fogging.
Notes on bulb replacement:
R
Only use bulbs of the same type and with
the specified watt rating.
R
Switch the lights off before replacing a
bulb to prevent short circuits.
R
Always use a clean lint-free cloth when
handling bulbs.
R
Your hands should be dry and free of oil
and grease.
R
Avoid touching the glass of the bulb with
bare fingers.
R
If the newly installed bulb does not come
on, contact an authorized electric drive
smart center.
R
Have the LED daytime running lamps*
replaced at an authorized electric drive
smart center.
Replacing bulbs
151
>> Practical hints
.
* optional
Z