SMART fortwo 2015, Руководство пользователя, Страница: 210 / 228

X
On light downhill gradients: place chocks
or other suitable items in front of the
wheels of the front and rear axle.
Raising the vehicle
G
WARNING
If you do not position the jack correctly at
the appropriate jacking point of the vehi-
cle, the jack could tip over with the vehicle
raised. There is a risk of injury.
Only position the jack at the appropriate
jacking point of the vehicle. The base of the
jack must be positioned vertically,
directly under the jacking point of the
vehicle.
Observe the following when raising the vehi-
cle:
R
make sure you have a suitable jack and
wheel wrench. If the jack is used incor-
rectly, it could tip over while the vehicle
is raised.
For further information enquire at any
smart centre.
R
the jack is designed only to raise and hold
the vehicle for a short time while a wheel
is being changed. It is not suited for per-
forming maintenance work under the vehi-
cle.
R
avoid changing the wheel on uphill and
downhill slopes.
R
before raising the vehicle, secure it from
rolling away by applying the parking brake
and inserting wheel chocks. Never disen-
gage the parking brake while the vehicle is
raised.
R
the jack must be placed on a firm, flat and
non-slip surface. On a loose surface, a
large, flat load-bearing underlay must be
used. On a slippery surface such as tiles, a
non-slip underlay must be used, e.g. rubber
mats.
R
do not use wooden blocks or similar objects
as a jack underlay. Otherwise, the jack will
not be able to achieve its load-bearing
capacity due to the restricted height.
R
make sure that the distance between the
underside of the tyres and the ground does
not exceed 3 cm.
R
never place your hands or feet under the
raised vehicle.
R
do not lie under the vehicle.
R
do not start the engine when the vehicle is
raised.
R
do not open or close a door or the tailgate
while the vehicle is raised.
R
make sure that no persons are present in the
vehicle when the vehicle is raised.
Steel wheel with hub cap
X
Vehicles with steel wheels and wheel caps:
carefully reach into two of the hub cap
openings and remove the hub cap.
Steel wheel with hub cap
X
Vehicles with steel wheels and hub caps:
remove the hub cap.
208
Changing a wheel
>> Wheels and tyres.