24
SMART Camfire DCi User's Guide
5
Click the Activate Statusboard button.
or
Click the Deactivate Statusboard button.
The
Activating/Deactivating the Statusboard
page will indicate when your setting has
been saved.
Assigning a Control Unit Password Using a Web
Browser
After an extended period of inactivity, the Camfire DCi system automatically goes into
sleep mode. You can initiate sleep mode simply by pressing the Sleep button. By default,
a password isn't required to activate the control unit. However, if you want to restrict
access, your system administrator can assign one.
To assign a control unit password:
1
Open a Web browser, such as Microsoft Internet Explorer or Netscape
Communicator, on a computer connected to the same network as the control unit.
2
Enter the IP address of the control unit in the
Address
bar of the Web browser and
click
Configure Camfire DCi Unit
in the Web page that appears.
or
Enter the IP address of the control unit, plus “/config”, in the
Address
bar of the Web
browser. For information about how to determine the IP address of your control unit,
refer to pages 22
A password dialog box will appear.
