Submenu setting
Description
High Speed Fan
Adjusts the speed of the projector’s fan. Select
High
or
Normal
.
N
N O T E
Use the High setting when the projector’s temperature is high or the
altitude is above 6000' (1800 m).
Projector Mode
Adjusts the projection mode to
Front
,
Ceiling
,
Rear
or
Rear Ceiling
.
I
I M P O R T A N T
SMART recommends that you never change this setting from the
Ceiling
projection mode.
Source
Adjusts the input source to
VGA-1
,
VGA-2
,
Composite
or
S-Video
.
VGA1
Assigns an alternative name to your VGA 1 input, which appears
when you select the VGA 1 input.
VGA2
Assigns an alternative name to your VGA 2 input, which appears
when you select the VGA 2 input.
S-Video
Assigns an alternative name to your S-video input, which appears
when you select the S-video input.
Composite
Assigns an alternative name to your Composite video input, which
appears when you select the Composite video input.
Emergency Alert
Turns the on-screen alert broadcast message on or off. When
enabled, this message displays over the current projected image.
Alarm Message
Displays an on-screen emergency notification message (maximum
60 characters).
3D settings
This menu allows you to enable or disable 3D image display and set its format.
Submenu setting
Description
3D On/Off
Turns the 3D feature on or off.
3D Invert
Selects the 3D Invert setting (
L-R
or
R-L
).
l
L-R
displays visual data for the left eye first.
l
R-L
displays visual data for the right eye first.
3D Format
Selects the 3D format (
Interleaved
or
Under-over
).
l
Interleaved
breaks down the image frame for each eye,
alternately displaying a line of visual information from each
frame.
l
Under-over
concurrently displays horizontally stretched image
frames for each eye, one above the other.
Network settings
This menu allows you to use or not use Dynamic Host Control Protocol (DHCP) and to set the
network-related addresses and names when DHCP is not used.
A P P E N D I X
A
Remotely managing your system through a network interface
67
