8
SPECIFICATIONS
Device Type
2 Channel Power Amplifier
Inputs
2 Line Level, Floating RCA Jacks
Unbalanced high impedance, approx 43k Ohms
Outputs
2 Speaker Level, Gold Plated 5-Way Binding Posts
8 Ohm or 4 Ohm
Rated Power Output
All power ratings are with both channels driven
150 Watts at 8 Ohms, 20 Hz - 20 kHz, Stereo Mode
240 Watts at 4 Ohms, 20 Hz - 20 kHz, Stereo Mode
500 Watts at 8 Ohms, 20 Hz - 20 kHz, Mono Bridged Mode
Distortion
Measured at 150 Watts into 8 Ohms with both channels driven
Typically less than 0.05% THD+N at 1 kHz, (Model 2X150)
Typically less than 0.15% THD+N at 1 kHz , (Model 2X150VT)
Input Sensitivity
Approximately 1.95 VAC rms for full output at 8 Ohms
Gain
25 dB (17.75 V/V)
Frequency Response
Measured at 150 Watts into 8 Ohms
±
0.15 dB from below 10 Hz to 20 kHz
-0.5 dB at 60 kHz -1.2 dB at 100kHz
Signal to Noise Ratio
Better than -100dB re: full output
Channel Separation
Better than 60 dB from 10 Hz to 20 kHz
Power Requirements
120 VAC 60 Hz - 8 Amperes -OR- 220 - 240 VAC 50 Hz - 4 Amperes
Weight and Dimensions
Approximate:
23 lbs.
15.75” W x 5.75” H x 10.5“ D
10.44 kg
40 cm W x 14.6 cm H x 26.7 cm D
LIMITED WARRANTY
SMART warrants this product against malfunction or failure due to defects in workmanship or materials for a period of
three years from the date of shipment. If a problem occurs during the warranty period, the unit will be repaired,
without charge for materials or labor. This limited warranty does not cover products that have been abused, altered,
modified, or operated in other than specified conditions. Returned equipment or defective parts must be shipped
freight prepaid to us by the dealer or customer. Our limited warranty does not cover damages resulting from accident,
misuse or abuse, lack of responsible care, or failures not attributable to manufacturing defects, except as provided
herein. SMART Devices, Inc. makes no warranties, express or implied, including warranties of merchantability or
fitness for a particular purpose.
Features and Specifications subject to change without notice. SMART Devices, Inc. assumes
no responsibility to incorporate improvements or changes into existing products.
