7
FUSES
Replace fuses only with the types and ratings indicated. The power fuse is a slow-blow type
such as a MDL8, 250 Volt fuse or equivalent.
The speaker fuses are AGC8, 250 volts rating or equivalent. These are used to protect the
amplifier in the event of a short circuit or a very low impedance load connected to the
output binding posts. When either of these output fuses blow, some very small amount of
distorted sound may still be heard. This is often an indication that a fuse has blown. For
additional speaker protection, you may replace the speaker fuses with lower current fuses if
you have speakers that are not designed to handle the power that this amplifier is capable of
delivering. Please contact the factory if you have questions regarding the speaker fuses.
There are 4 internal fuses which should only blow in the event of a catastrophic failure in
the amplifier modules or the power supply. DO NOT under any circumstances attempt to
replace these fuses.
SERVICE
DO NOT REMOVE THE COVER FROM THIS AMPLIFIER. THERE ARE NO USER SERVICE-
ABLE PARTS INSIDE. THERE ARE POTENTIALLY LETHAL HIGH VOLTAGES INSIDE THE
AMPLIFIER. YOU COULD BE SERIOUSLY INJURED BY ATTEMPTING TO SERVICE THIS
PRODUCT. ONLY QUALIFIED AND WELL-TRAINED PERSONNEL SHOULD SERVICE
THIS AMPLIFIER. SMART DEVICES, INC. ASSUMES NO LIABILITY IF YOU DO NOT HEED
THESE WARNINGS.
Please contact the factory for service on this amplifier.
The phone number is 1-800-45-SMART (1-800-457-6278) or 770-449-6698.
You may also e-mail us at [email protected]
Also you may visit our web site at http://www.smart-cinema.com
Connecting a Speaker for
Mono Bridged Operation
Note that only the + output posts are used
+
+
-
-
1
2
