CHAPTER 4
SETTING UP THE INTERACTIVE FLAT PANEL
24
Turning on the interactive flat panel and
room computer for the first time
Turn on the interactive flat panel after mounting it and connecting power and devices.
To turn on the interactive flat panel for the first time
1. Flick the power switch beside the AC power inlet to the ON (I) position.
The SMART splash screen appears.
2. Follow the on-screen instructions to calibrate the board.
IMPORTANT
Use the pen, rather than your finger, when calibrating the board.
3. Select your preferred language, and then press
Next
.
4. Select your country, and then press
Next
.
5. Name the board, and then press
Next
.
6. Set the date and time, and then press
Next
.
7. Optionally, select a wireless network, and then press
Next
.
NOTE
You don't need to select a network if you're using a wired network connection.
8. Select the list of applications that will appear in the Launcher, and then press
Next
.
9. Press
Finish
.
10. The
Welcome
screen appears.
