Smart Technologies SMART Board 480, Руководство пользователя

Страница: 77 / 87

These commands control the current system settings. These commands are available even when the
projector is in Standby mode.
Command Command target range Response
set restoredefaults [none] restoredefaults=done
set lamphrs [target] =0 lamphrs=0
set vgaoutnetenable [target] =on
=off
vgaoutnetenable=[target]
N
N O T E
The VGA Out and Network settings features are off by default. Select On to activate these
features.
Simple Network Management Protocol (SNMP)
SMART UF75 projectors support a list of SNMP commands as described in the management
information base (MIB) file. You can download this file by browsing to smarttech.com/software and
clicking the MIB files link in the Hardware section for the SMART UF75 projector.
The SNMP agent supports SNMP version 1. Upload the MIB file to your SNMP management system
application, and then use it as described in your application’s user guide.
A P P E N D I X A
Remotely managing your interactive whiteboard system
67