Smart Technologies Senteo, Руководство пользователя

Страница: 47 / 56

Maintaining the Senteo Interactive Response System 41
Section 4: Maintaining the Senteo
Interactive Response System
Preventing Component Damage
• Don’t use sharp or pointed objects, such as ballpoint pens or pointers, to press the clicker
buttons.
• Never use abrasive erasers or harsh chemicals when cleaning.
• Avoid setting up and using your system in an area with excessive levels of dust, humidity or
smoke.
Cleaning the Receiver and Clickers
With proper care, your Senteo interactive response system hardware will provide years of trouble-
free service. Follow these tips to keep them clean:
• Remove dust with a damp cloth before using a cleaner.
• Clean the unit’s surface with a household glass cleaner, such as Windex®, daily, weekly or as
required.
• Do not spray cleaner directly onto the clicker. Instead, spray a light amount of cleaner on a
cloth and then wipe gently.
Changing Clicker Batteries
Under normal operation, the clicker batteries can operate for up to 200 days. When replacing
them, use fresh batteries of the same type and quality, and change both at the same time.
1. Using the provided Phillips® screwdriver, remove the screw from
the back of the clicker, and then remove the cover.
2. Remove the exhausted batteries, and dispose of them according
to local regulations.
3. Insert new AA batteries as shown.
The clicker automatically turns on when you insert the batteries.
4. Replace the cover and screw.
5. Verify that the start-up menu appears.
6. Press the
Power button for one to two seconds to turn the clicker
off.
CAUTION • Do not install batteries with the polarity (+/–) reversed.
• Do not attempt to recharge the batteries.
• Do not dispose of batteries in a fire or incinerator.
• Dispose of batteries according to the laws and regulations of your region. If you
don’t know the applicable rules for your region, consult the battery manufacturer.
To change the clicker batteries