Smart Technologies SBID-MX265, Руководство по установке и обслуживанию, Страница: 94 / 110

CHAPTER B
USING DISPLAY SETTINGS ON YOUR SMART BOARD MX
82 smarttech.com/kb/171257
Option Values Function Notes
OTA sever [OTA servers] Sets which server the display
connects to for updates
NOTE
The display must be connected
to the Internet to check for
system software updates.
Default is Auto .
Power saving mode
Enable
Disable
Turns on or turns off power saving
mode Enabled by default.
When enabled, power saving mode
activates after 90 minutes of
inactivity.
Enabling Power saving mode
makes RS-232 control of the display
unavailable until the display is
turned on using the power button
on the front control panel .
Update
Option Values Function Notes
Firmware version [N/A] Shows technical information about
the display’s scalar firmware. To see the firmware version use
the About option (see
About on the
facing page.
Update
[N/A] Checks for updates to the system
software If an update is available, the text
changes to Apply update now.
NOTE
The display must be connected
to the Internet to check for
system software updates. Check
the display’s network settings.
To check the network settings,
see
Network on page 80.
Recovery
Option Values Function Notes
Restore user settings [N/A] Resets any options the user may
have changed [N/A]
Restore factory settings [N/A] Resets all options to their default
values Only administrators should reset
the display.