APPENDIX B
USING THE INTERACTIVE FLAT PANEL ON-SCREEN DISPLAY MENUS
72
smarttech.com/kb/170819
Using the SMART Board 8084i-G4 interactive flat
panel on-screen display menu
You can access the SMART Board 8084i-G4 interactive flat panel on-screen display menu using
the menu control panel or the remote control.
Using the menu control panel
The menu control panel is located on the bottom of the interactive flat panel.
No.
Name
1
MENU
2
OK
3
[Up]
4
[Down]
5
[Left]
6
[Right]
Using the remote control
The remote control requires two 1.5V AAA batteries.
WARNING
To reduce the risk associated with leaking batteries:
l
use only AAA type batteries
l
do not mix used and new batteries
l
orient the battery’s plus (+) and minus (-) terminals according to the markings found on the
remote control
l
do not leave the batteries in the remote control for an extended period
l
do not heat, disassemble, short or recharge the batteries, or expose them to fire or high
temperature
l
avoid eye and skin contact if batteries have leaked
l
dispose of exhausted batteries and product components in accordance with applicable
regulations
Содержание Board 8084i-G4
Страница 62: ......
Страница 90: ......
Страница 95: ......
Страница 96: ...SMART TECHNOLOGIES smarttech com support smarttech com support entsupport smarttech com kb 170819 ...