Smart Technologies Board 8084i-G4 Скачать руководство пользователя страница 10

Страница: 10 / 96

CHAPTER 1

WELCOME

smarttech.com/kb/170819

NOTES

This guide documents room systems that use SMART Board 8055i-G5, 8065i-G5 and

8084i-G4 interactive flat panels. For information about room systems that use SMART Board

8055i or 8070i-G4 interactive flat panels, see the

SMART Room System with Skype for

Business setup and maintenance guide

(

smarttech.com/kb/170450

Other, minor components are documented elsewhere in this guide.

SMART Board interactive flat panels

SMART Board interactive flat panels feature SMART’s proprietary

DViT® (Digital Vision Touch) technology on a 16:9 LCD screen with

e-LED backlight. DViT technology enables users to do the

following:

Interact with content by pressing it with their fingers

Write digital ink using their fingers or one of the provided

pens

Erase digital ink using their fists, their palms or the provided

eraser

During a meeting, the interactive flat panels show video, shared PowerPoint files, and video input

from optionally connected computers. In addition, users can use the whiteboard feature to record

and share notes.

For information about which interactive flat panel model is included with your room system and the

differences between these models, see

Comparing room sizes

on page 7.

NOTE

The USB receptacle on the bottom-left corner of SMART Board 8055i-G5 and 8065i-G5

interactive flat panels is not functional in room systems.

room system appliance

The room system appliance includes Skype for Business Room System software as well as

SMART Product Drivers. Users can use Skype for Business Room System software to start, join and

facilitate meetings and connect with others through your organization’s Lync or Skype for Business

infrastructure. SMART Product Drivers enables the touch features of the interactive flat panels and

the operation of the room system components.

In room systems that use SMART Board 8055i-G5 and 8065i-G5 interactive flat panels, the room

system appliance is installed in an enclosure mounted to the wall behind the left interactive flat

panel.

Содержание Board 8084i-G4

































































































Результаты поиска

Содержание Board 8084i-G4

Отзывы:

Похожие инструкции для Board 8084i-G4

Бренды по названию

Популярные бренды

Smart Technologies Board 8084i-G4, Руководство администратора

Результаты поиска

Содержание Board 8084i-G4

Отзывы:

Похожие инструкции для Board 8084i-G4

Бренды по названию

Популярные бренды