11
3. Use of the Interlock
3.1 Start-up Procedure
1.
Turn the car on. The interlock will activate, and the
screen will display
INITIALISING
.
2.
When the interlock is ready, the screen will display
BLOW.
3.
After a successful completion of the test, the interlock
analyses the breath sample, and the screen will display
ANALYSING.
The display will then show one of the following test results:
Following
PASS
, the interlock will show
START
3:00.
You may now start the vehicle
You have blown alcohol into the interlock and
you are close to the pre-set limit. You are able
to start your vehicle; however, your alcohol
level may continue to rise, and you may be at
risk of blowing a violation on a random re-test.
We advise you NOT to drive your vehicle until you are
sure you have NO alcohol in your system.
A
VIOLATION
occurs when the alcohol detected
in your breath sample is above 0.020 BAC. The
interlock will go into a 5-minute lockout and you
will need to take the test again.
One of several
ABORT
messages: Abort means
that you need to adjust the way that you're
taking the test.
