background image

4

.

Position

IMPORTANT!

Position your fountain so that receives direct sunlight. The fountain will NOT work if the solar panel 
is in a shaded area.

Warnings

Frost causes damage, store whole product inside during cold weather.

0°C/32°F

Important!

Water must be regularly topped off. We recommend regularly changing the 
water to ensure it remains clean and free from debris.

4

.

Position

IMPORTANT!

When reconnecting the pump and panel take care 
to ensure that the connectors are water tight. Slightly twist the 

connectors when pushing together, ensure the red o-ring 
seal remains in it’s groove and it is not displaced.

Important!

Position your fountain so that receives direct sunlight. The fountain will NOT work if the solar panel 
is in a shaded area.

Warnings

Frost causes damage, store whole product inside during cold weather.

0°C/32°F

Important!

Water must be regularly topped off. We recommend regularly changing the 
water to ensure it remains clean and free from debris.

When reconnecting the plugs ensure that the connections 
are water tight. Push the plugs together until they touch 
the rubber o-ring, slide the threaded cap over the plug 
and turn the cap until tight.

Important!

1

2

3


Содержание 15390MM1









Отзывы: