INSTALLATION
1.
Remove rear battery cover and place 6 AA cell batteries (we recommend alkaline or rechargeable batteries -
not provided) with the polarity as shown in the battery door. Replace battery cover.
2.
Determine where the product is to be mounted and insert nail or screw (not provided) in the wall.
Mount LED Back Plate on the wall by sliding it onto the nail or screw head like hanging a picture frame.
3.
Slide the Sconce Cover onto the LED Back Plate by fitting the holes in the top of the Sconce Cover
onto the Mounting Posts to hold it in place.
Push the Power Button located on the bottom of the unit to power the unit on. If the unit has an amber
flicker mode, press again to switch from white LED to amber LED. Push the Power Button again to power
the unit off.
4.
USE
1.
This unit contains a built in 4 hour timer which is activated immediately. The unit will power off after 4 hours of
use. This helps maximize battery longevity. Unit can be turned back on manually to commence a new 4 hour
session. Unit can be turned off manually at any time.
2.
This unit features an automatic 24 hours timer that will allow the unit to turn on at the same time each day.
To activate, simply turn the unit on (in either mode) and let the unit run for the 4 hour time period. The unit
will automatically turn off after 4 hours of use and then turn on 24 hours after it was originally turned on. To
override this feature simply turn the unit off by pressing the manual on/off button to off.
Battery Powered
Vertical Wall Sconce
B
Front of LED Back Plate
Back of LED Back Plate
Mounting Posts
Battery Cover
Mounting Holes
Power Button
Requires
• AA Batteries x6
(Not Included)
Contents
• A - Sconce Cover*
• B - LED Back Plate
*Sconce Cover may vary in style/shape
Telephone:
+ 1 813 343 5775
Email:
Web:
www.itsexcitinglighting.com
It’s Exciting Lighting is a Smart Living Home & Garden brand
© 2016.3
Smart Living Home & Garden
A
A
A
B
B
