3
WARNING & CAUTION
Ø Please handle the equipment with care. Physical Damage to the system is not covered under
warranty.
Ø Do not power on the system without reading this manual. Ensure proper power supply with
Earthing.
Ø Note down the serial number and model no. of the device for future reference and quote in all
support and service requests.
Ø To connect or interface the Card reader to the
Smart XS NG
unit please refer to the Hardware
Installation Guide or Manual and carefully follow the instructions. A trained technician must make
the connections.
Any negligence on your part may damage the Card reader interface on the
Smart XS NG
terminal.
Ø Mounting the unit in strong sunlight may affect user visibility of the LCD. Ensure that the LCD and
LED’s are clearly visible in all lighting conditions.
Ø The fingerprint sensor glass may periodically require cleaning - use suitable glass cleaner.
Ø Do not uses this unit near water.
Ø Do not opens system or places it near other heavy electrical equipment. The system is sensitive
to Electro Static Discharge (ESD)
Ø Never insert objects of any kind into the unit or through the cabinet slots as they may touch
voltage points and/or short circuit parts possibly resulting in fire or electric shock. Never spill
liquid of any kind on the unit.
Ø when connecting up the Controller Access Controller ensure that the mains power supply is
safely isolated. Power up the controller only when installation is complete.
Ø Operating conditions: 0 to 55 deg Celsius and 50 deg Celsius at 90% RH.
Fire Safety and accountability Notice
When connecting card or Biometric readers to any emergency entry, exit door, barrier or elevator
must provide an alternative exit in accordance with all fire and life safety codes pertinent to the
installation. These fire and safety codes vary from city to city and you must get approval from local
fire officials whenever using an electronic product to control a door or other barrier.
Important Instructions
Care should be taken identifying the wires. Improper wiring may render permanent damage
to the device or personal injury.
Refer the color code on the Reader to connect the external weigand reader on the controller.
Check the earthing at the site before installing the controllers. Normally the earthing should
be between 1V to 2V only. Earthing on the higher side may damage the controller or its
various other components.
Before Installation delete all data ( Factory reset ) using keypad menu * 90
Disclaimer
Changing of default user password is mandatory to avoid tampering of the device.
In case of user password not changed; smart I will not be responsible for any tampering on
the device.
