SMART Embedded Computing PCIE-7217 Скачать руководство пользователя страница 101

Страница: 101 / 108

Software

PCIE-7217 Installation and Use (6806873A01B)

101

6.3.1

Microsoft Windows

Windows

10, 64-bit was validated and is listed as the plan of record by Intel.

6.3.1.1

Drivers

The latest updates and Microsoft Windows drivers are available for download through the

SMART EC Customer Resource Center at

https://www.smartembedded.com/ec/support/

NOTE:

The PCIE-7217 requires, at a minimum, that the Intel

Dynamic Power and

Thermal Framework (DPTF), Intel

Graphics and Radeon RX Vega M Graphics

drivers are installed.

Drivers are available for the following features:

While all of the on-board features are supported in Windows 10, some MaxCore

™

features

such as virtual Ethernet interfaces (PLX NIC) and shared SR-IOV devices (Intel

82575

10G Ethernet) are not supported when using Windows 10. These features only operate in

Windows Server 2016.

Table 6-3

Available Drivers

Feature

Operating System

Driver Version

Intel

SST Audio

Windows

10 64-bit

9.21.00.3595

Chipset

Windows 10
Windows

Server 2016

10.1.17730.8089

Intel

HD Graphics

Windows 10 64-bit

24.20.100.6195

Radeon RX Vega Graphics

Windows 10 64-bit

18.12.2

Intel

DPTF

Windows 10 64-bit

8.4.11000.6436

Intel

Gigabit Ethernet

Controller

Windows 10
Windows Server 2016

24.0

Intel

Virtual Buttons

Windows 10

2.2.1.31

Serial IO

Windows 10

30.100.1823.1

1. For the Radeon Graphics to work properly, you must use Windows 10 Version 1709 (RS3) or higher.

2. Serial IO is not supported in Windows Server OS.

Содержание PCIE-7217













































































































Результаты поиска

Содержание PCIE-7217

Отзывы:

Бренды по названию

Популярные бренды

SMART Embedded Computing PCIE-7217, Инструкция по установке и эксплуатации

Результаты поиска

Содержание PCIE-7217

Отзывы:

Бренды по названию

Популярные бренды