SMART Embedded Computing Centellis 2x00 User Card-10GE, Инструкция по установке и эксплуатации

Страница: 9 / 50

Centellis 2x00 User Card-10GE Installation and Use (6806800H33E) 9
About this Manual
Overview of Contents
This manual is intended for users qualified in electronics or electrical engineering. Users
must have a working understanding of AdvancedTCA and telecommunications. This
manual provides the information you need to install, access and operate the Centellis 2x00
User Card-10GE. Additionally you need the
System Management Interface Based on HPI-
B (Centellis 2000/2100/4411) User’s Guide to adopt the hardware platform interface.
The manual contains the following chapters and appendix:
Safety Notes on page 15 describes the safety information which has to be regarded.
Sicherheitshinweise on page 19 provides a German translation of the safety notes.
Chapter 1, Introduction on page 23 gives an overview of the product.
Chapter 2, Centellis 2x00 User Card-10GE Hardware on page 29 provides detailed
hardware information of the product.
Chapter 3, Controls, Indicators and Connectors on page 37 describes external interfaces
of the product, this includes connectors and LEDs.
Chapter 4, Board Exchange on page 41 describes the exchange prerequisites and
procedures.
Appendix A, Related Documentation on page 47 lists related documentation and
specifications.
Abbreviations
This document uses the following abbreviations:
Abbreviation Definition
AdvancedTCA
ATCA
Advanced Telecommunications Computing Architecture
AMC Advanced Mezzanine Card
API Application Programming Interface
BT Block Transfer
CGE Carrier Grade Edition
CO Central Office
CPCI Compact Peripheral Component Interconnect
ECC Embedded Communications Computing