TL-2016R3 Wireless Fall Monitor
Seat Belts
SEAT BELT PLACEMENT
• Unscrew one screw on either side of wheelchair that holds seat in place.
• Attach seat belt to wheelchair by lining up the grommet holes on seat belt with the
screw holes. Re-insert screws through both seat belt and wheelchair to hold seat belt
in place. Make sure the screws are tightened.
• Adjust seat belt to desired length using the black buckle that holds the adjustment strap in place.
• Place the monitor out of reach of the resident. Suitable mounting location is the back of wheelchair,
so that the resident cannot tamper with monitor.
TEST THE SYSTEM
• Buckle and unbuckle the seat belt t
o set off the aler
t. The monitor is now active. The alert will
sound whenever the seat belt is unbuckled.
• When the alarm is activated, press the “
Reset
” button on front of the monitor to silence the alert.
The status light on front of monitor will blink when the seat belt is plugged into the
monitor and buckled.
Bed and Chair Sensor Pads
BED PLACEMENT
• Place the pad under shoulders to be alerted when the resident sits up in bed.
• Place pad under lower back/buttocks to be alerted when the resident
vacates the bed.
• Place the monitor out of reach of resident. Suitable mounting locations
include: back of headboard, wall or under bed. Make sure the resident
cannot tamper with monitor.
(It is the caregiver’s responsibility to route the
cord under the sheet so the resident cannot tamper with it).
WHEELCHAIR/CHAIR PLACEMENT
• Center pad on the chair seat under buttocks.
• Place the monitor out of reach of the resident. Suitable mounting location is the
back of wheelchair, so that the resident cannot tamper with monitor.
IMPoRTANT:
TEST THE SYSTEM
• Plug the pad into the monitor and apply pressure to the pad to activate the
system. The Monitor will beep twice when activated.
• The alert tone will sound when pressure is released from pad. Press the
“
Reset
” button on front of monitor to silence the alert. The status light on
the front of monitor will blink when pad is plugged into monitor and
pressure is on pad.
Nurse Call Button
NuRSE CALL BuTToN PLACEMENT
• Place the optional nurse call button (
Part # TL-2016NC
) within
easy reach of the resident.
• Use the clip provided to secure the button to the bedspread
or chair upholstery.
CordLess
™ Bed Pa
d
Wireless F
all Monito
r
Call
Low
Battery
Pad
Lost
Wireless F
all Monito
r
Call
Low
Battery
Pad
Lost
Wireless F
all Monito
r
Call
Low
Battery
Pad
Lost
1
2
Need Set-up Help? (800) 650-3637
CauTioN:
If using this monitor with Change Pad Indicator™ Timed Sensor Pads, this monitor will not indicate when pad life has expired. Pads will still
function normally. Call (800) 650-3637 for more information.
WaRNiNg:
Failure to comply with warning may result in injury or death. This device is not suitable for all individuals. Other devices may be required.
This device is not a substitute for visual monitoring by caregiver. The manufacturer does not claim that this device will stop elopement and/or stop
falls. This device is designed to augment caregivers’ comprehensive resident mobility management program.
Test this device before each use.
Read the instructions and Legal Disclaimer.
The Smart Caregiver Corporation TL-2016R3 Monitor is designed to be installed by the end user. As such, it is the entire responsibility of the buyer to ensure
that the system is properly installed and tested. Further, the system is not designed to replace good caregiving practices including, but not limited to:
a.) Direct patient supervision
B.) adequate training f
or staff personnel f
or
fall prevention and elopement
C.) Testing of the system before each use
WHERE PERMISSIBLE, IT IS THE SELLER’S INTENT TO LIMIT ANY LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL ECONOMIC DAMAGES TO
REFUND OF THE PURCHASE PRICE OR REPLACEMENT OF THE GOODS. SELLER DISCLAIMS ANY LIABILITY FOR COMPENSATORY OR OTHER DAMAGES
ARISING OUT OF THE USE OF THE GOODS.
WaRNiNg:
The manufacturer does not claim that this device will stop elopement and/or stop falls. This device is designed to augment caregivers’
comprehensive resident mobility management program. This product is to be used by a licensed caregiver only.
Limited Warranty: Seller warrants that the goods sold will be free from defects of workmanship and manufacturing, for a period of one year from
the date of sale. Other than this limited warranty, seller makes no express or implied warranties. Except for this limited warranty, NO EXPRESS OR
IMPLIED WARRANTIES ARE GIVEN AND NO AFFIRMATION OF SELLER, BY WORDS OR ACTION, WILL CONSTITUTE A WARRANTY. THE GOODS BEING
PURCHASED ARE BEING SOLD ON A “WITH ALL FAULTS” BASIS. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE GOODS IS WITH THE
BUYER. SHOULD THE GOODS PROVE DEFECTIVE FOLLOWING THEIR PURCHASE, THE BUYER, AND NOT THE MANUFACTURER, DISTRIBUTOR OR RETAILER,
ASSUMES THE ENTIRE COST OF ALL NECESSARY INSTALLATION, SERVICING OR REPAIRS.
Sm a r t Ca r e g iv e r Co r po r a t io n
1229 North McDowell Blvd., Petaluma, CA. 94954 | Tel: 800-650-3637
[email protected] | www.smartcaregivercorp.com
Wireless F
all Monito
r
Call
Low
Battery
Pad
Lost
Bed Pad
Wireless F
all Monito
r
Call
Low
Battery
Pad
Lost
Floor Mat
Wireless F
all Monito
r
Call
Low
Battery
Pad
Lost
Floor
Mat
Wireless F
all Monito
r
Call
Low
Battery
Pad
Lost
Floor Mats
FLooR MAT PLACEMENT
• Plac
e the floor ma
t in the desired location such as a
critical doorway or next to a bed.
• Place the monitor out of reach of resident. Suitable mounting
locations include the back of the headboard, wall or under the
bed so the resident cannot tamper with the monitor.
TEST THE SYSTEM
• Step on Floor Mat t
o set off the aler
t. The monitor is now active.
The alarm will sound whenever weigh
t is on the floor ma
t.
• When the alert is activated, press the “
Reset
” button on the front
of the monitor to silence the alarm.
NoTE:
The Status Light does not func
tion when using floor ma
ts.
Sm a r t Ca r e g iv e r Co r po r a t io n
TL-2016R3
Wireless Fall Monitor
Installation and Use Instructions
• Wireless paging directly from
the monitor
• Works with sensor pads
, floor
mats & nurse call buttons
PATENTED TECHNOLOGY
with included Caregiver Key
TM
