SMART Board SmartBoard 600i2, Конфигурация и руководство пользователя

Страница: 33 / 74

99-00850-21 B0 Connecting Your 600i2 Interactive Whiteboard System 23
Connecting Audio/Visual Outputs from Your Guest Computer to Your Interactive Whiteboard System’s
ECP Input
1. Make sure that you have a shielded VGA cable
(not included) and an audio cable with 3.5 mm plugs
(optional, not included) that are long enough to
connect your guest computer to your ECP.
2. Connect the VGA cable to the VGA input on the
bottom of your ECP.
3. If you’re connecting audio, connect your audio cable
to the audio input next to the VGA input.
4. Connect the other end of your VGA cable
to your computer’s video output.
5. Connect the other end of the audio cable to your
computer’s audio output.
IMPORTANT
It is recommended that you reserve the VGA connector on the ECP to install your guest
computer’s video output. If you do not have guest computers, you can use the VGA connector
on the ECP to install your host computer’s video output.
To connect your guest computer’s video or audio output to your ECP input
IMPORTANT
Your interactive whiteboard system does not include speakers. To hear sound, you need to
connect an audio system to the projector’s audio output. Consult your
authorized SMART
reseller to determine your audio output options.