SMART Board SmartBoard 600i2, Конфигурация и руководство пользователя

Страница: 32 / 74

22 Connecting Your 600i2 Interactive Whiteboard System 99-00850-21 B0
Connecting Your Computer to the Interactive Whiteboard System
You must connect your computer video and audio outputs to your Unifi 45 projector. Use only one set of the
following instructions for your specific installation.
Connecting Your Host Computer’s Audio/Visual Outputs to the Projector Inputs
1. Make sure that you have a shielded VGA cable (not included) and audio
cable with 3.5 mm plugs (optional, not included) that are long enough to
connect your computer to your Unifi 45 projector.
2. Pass your VGA and audio cables from your projector into the cable
channel’s upper end on the projector boom. Pass your cables down
through the cable channel’s lower end, and then pass them behind the
SMART Board interactive whiteboard to your computer.
3. Connect your VGA cable to the input marked “Computer 2" on
your projector.
4. Connect the SMART audio mixer device to your
projector’s 3.5 mm audio input, and then connect
your ECP harness cable’s 3.5 mm audio plug to
one of the two inputs on the SMART audio mixer
device. You don’t need to use the other input on the
SMART audio mixer device for this installation.
5. If you’re using an audio cable from your computer,
on your projector, connect your audio cable with a
3.5 mm plug to the other input jack on the SMART
audio mixer device.
6. Connect the other end of your VGA cable
to your computer’s video output connector.
7. Connect the other end of your audio cable to your
computer’s audio output.
IMPORTANT • Install your host computer’s video output directly to your Unifi 45 projector and not to the
ECP. The VGA connector on the ECP is then available for a guest computer connection,
such as a laptop. If you won’t have guest computers, you can use
the VGA connector on the ECP instead.
• Use only the input marked “Computer 2" on your projector to connect the ECP
harness cable.
To connect your host computer’s video (and optional audio) outputs to your projector input
COMPUTER 2 IN
MONITOR OUT
AUDIO IN
AUDIIO OUT
R - AUD IO - L
R - AUDI O - L
A
C
D
G
B A
C
VGA
3.5 mm
E2
E2
SMART Audio Mixer
Device
ECP Harness
Cable