SMART Board SMART Board X800i5, Конфигурация и руководство пользователя

Страница: 77 / 100

Connecting your room control system to the ECP
By connecting a computer or room control system to the 4-pin connector on the ECP, you can select
video inputs, start up or shut down your interactive whiteboard system and request information such
as projector lamp use, current settings and network addresses.
Serial interface settings
The serial interface of the SMART UF75 or UF75w projector acts as a Data Communications
Equipment (DCE) device and its settings can’t be configured. You must configure your computer’s
serial communication program (such as Microsoft® HyperTerminal) or your room control system’s
serial communication settings with the following values:
Setting Value
Data Rate 19.2 kbps
Data Bits 8
Parity None
Stop Bits 1
Flow Control None
A P P E N D I X A
Remotely managing your interactive whiteboard system
67