APPENDIX A
REMOTELY MANAGING YOUR SYSTEM THROUGH A NETWORK INTERFACE
49
smarttech.com/kb/170340
Password settings
This menu provides a security function that allows an administrator to manage projector use and
enable the administrator password function.
Submenu setting
Description
Password
When the password function is enabled, the administrator password
is required to access Web Management. Select Disable to allow
remote web management of the projector without requiring a
password.
NOTES
l
The first time you enable the password settings, the default password value is four numbers,
for example, 1234.
l
If you forget the projector password, refer to
on page 39 to set the
projector setting to factory defaults.
Simple Network Management Protocol (SNMP)
Your projector supports a list of SNMP commands as described in the management information base
(MIB) file. You can download this file by browsing to
and clicking the MIB
file’s link in the
Hardware
section for the projector.
The SNMP agent in your projector supports SNMP version 1 or 2. Upload the MIB file to your SNMP
management system application, and then use it as described in your application’s user guide.
Crestron® RoomView®
Crestron RoomView Express management software is embedded in the SMART UX80 projector to
deliver built-in direct connectivity and control via the IT network. There are no control processors or
custom programming is required; just connect the SMART UX80 projector to your network and
Crestron RoomView immediately recognizes the device for seamless communication and control.
RoomView Connected® devices also feature built-in instant help-desk messaging and emergency
broadcasting to provide the safest, most secure classroom environment so teachers have the
confidence to focus on teaching.