APPENDIX A
REMOTELY MANAGING YOUR SYSTEM THROUGH A NETWORK INTERFACE
45
smarttech.com/kb/170340
Submenu setting
Description
Startup Screen
Sets the type of startup screen to SMART or User. The SMART
screen is the default SMART logo on a blue background. The User
screen uses the saved picture from the Capture User Startup Screen
function.
High Speed Fan
Adjusts the speed of the projector’s fan. Select High or Normal.
NOTE
Use the High setting when the projector’s temperature is high or the
altitude is above 6000' (1800 m).
Projector Mode
Adjusts the projection mode to Front, Ceiling, Rear or Rear Ceiling.
IMPORTANT
SMART recommends that you never change this setting from the
Ceiling projection mode.
Source
Adjusts the input source to VGA, HDMI1 or HDMI2.
SMART Fixed Install (FI) /
SMART Desktop mode (DT)
User-defined tag not currently used. Reserved for future application.
HDMI1
Assigns an alternative name to your HDMI1 input, which appears
when you select the HDMI1 input.
HDMI2
Assigns an alternative name to your HDMI2 input, which appears
when you select the HDMI2 input.
VGA1
Assigns an alternative name to your VGA 1 input, which appears
when you select the VGA 1 input.
Emergency Alert
Turns the on-screen alert broadcast message on or off. When
enabled, this message displays over the current projected image.
Alarm Message / Alert
Message
Displays an on-screen emergency notification message (maximum
60 characters).
Control panel II
This menu enables you to manage the projector 3d feature settings.
Submenu setting
Description
USB1 Source
Associates the input source to VGA, HDMI1 or HDMI2.
USB2 Source
Associates the input source to VGA, HDMI1 or HDMI2.