SMART Board Board 600i5, Конфигурация и руководство пользователя

Страница: 86 / 100

These commands control the current system settings. These commands are available even when the
projector is in Standby mode.
Command Command target range Response
set restoredefaults [none] restoredefaults=done
set lamphrs [target] =0 lamphrs=0
set vgaoutnetenable [target] =on
=off
vgaoutnetenable=[target]
N
N O T E
The VGA Out and Network settings features are off by default. Select On to activate these
features.
Simple Network Management Protocol (SNMP)
SMART UF75 or UF75w projectors support a list of SNMP commands as described in the
management information base (MIB) file .
The SNMP agent supports SNMP version 1. Upload the MIB file to your SNMP management system
application, and then use it as described in your application’s user guide.
A P P E N D I X A
Remotely managing your interactive whiteboard system
76