SMART Board 800i6, Конфигурация и руководство пользователя

Страница: 79 / 115

A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
66
Field definitions
Field Possible values Description
off option
l
now
This is an optional field and can simply be
skipped. When specified, it forces the device
to shut down – a user cannot cancel the
process. If ‘now’ is not specified, the ‘off’
command should cause a dialogue to be
displayed on the projector with a countdown. A
second `off` must be sent before the
countdown has expired to actually turn the unit
off. If the countdown expires without an
additional ‘off’ command, the projector does
not turn off.
N O T E
This should be considered another projector
state and when the countdown is completed
an asynchronous response should indicate
that the projector has returned to the ‘on’
state.
When powered down, this command should be
accepted but will not do anything except return
the power state.
powerstate
l
powering
l
on
l
cooling
l
confirm off
l
idle
The device’s current power state. Different
devices have different potential power states.
These power states should match the power
states found in the UF70 and UF70w projector.
Source Application Selection
Switches amongst different input sources and embedded applications, if any. Also controls the
USB switch for these given sources.
Command\response definitions
Command Response Responds when powered off
set input [target] input=[current] no
get input input=[current] yes
get videoinputs
videoinputs=[current
videoinputs]
yes
set usb1source [target] usb1source=[current] yes
get usb1source usb1source=[current] yes
set usb2source [target] usb2source=[current] yes