Chapter 4
Maintaining the display
45
3. Flick the switch beside the AC power inlet to the OFF (O)
position.
NOTE
Wait at least 30 seconds before turning the display back on.
To turn the display back on
1. Flick the switch beside the AC power inlet to the ON (I) position.
2. Press the
Power
button
on the convenience panel or the remote control.
To reset the display
Press and hold the
Power
button
on the convenience panel or the remote control for 10 seconds.
The display resets.
Cleaning and maintaining hardware
Checking the display installation
Inspect the display installation frequently to ensure that the display remains securely installed.
l
Check the mounting location for signs of damage or weakness that can occur over time.
l
Check for loose screws, gaps, distortions, or other issues that could occur with the mounting hardware.
If you find an issue, contact a trained installer.
