SMART Board 480i6, Конфигурация и руководство пользователя

Страница: 49 / 106

C H A P T E R 6
Troubleshooting your interactive whiteboard system
41 smarttech.com/kb/170584
To resolve operation issues, complete the following tasks:
Resolving connection issues
To resolve connection issues, complete the following tasks:
l
Confirm that the USB cable is properly connected from a fully functional USB receptacle on the
computer to the interactive whiteboard.
Resolving projector issues
Resolving projector errors
Resolving image issues
To resolve common image issues, complete the following tasks:
l
Ensure the computer or other video source is on and set to display a resolution and refresh rate
supported by the projector (see Video format compatibility on page 23).
l
Ensure the video source is properly connected to the projector.
l
Press the Input Select button on the remote control or [[Control Panel]] to switch to the correct
video source.
If these tasks don’t resolve the issue, refer to the following sections for additional troubleshooting
information.
Loss of signal
If a video source signal is not detected, out of
range of the projector’s support video modes or
the signal is being switched to a different device
or input, the projector doesn’t show a source
signal and instead displays the SMART logo on
a blue screen.