Smart Avionics PB-4 Скачать руководство пользователя страница 44

Страница: 44 / 78

6.3. Rename the current job

The section expands to show a text input box into which you enter the new

name for the current job - it must not be the same as an existing job name.

Press enter to action the rename.

6.4. Delete jobs

The section expands to show 2 sub-sections. The first sub-section contains

3 buttons:

• The Delete Job Completely button deletes all the data and configuration

information for the current job.

• The Delete Only Points button deletes all of the points for the current job.

• The Delete Only Spectra button deletes all of the spectra for the current

job.

Pressing one of those buttons will ask you to confirm your action. Think twice

here because the deleted data cannot be un-deleted. However, the data stored

on the PB-4 can be exported (before you delete it, not after!) and subsequently

imported again. So it is possible to back up your data to your computer.

The second sub-section contains a selector that lets you choose which jobs

you wish to delete and a button to carry out the action which you will be asked

to confirm. Once confirmed, all data associated with the selected jobs will be

deleted from the PB-4. Be very careful!

6.5. Save / restore PB-4 data

Note

Due to limitations in iOS, it is not possible to save/restore data

to/from an ipad or iphone unless 3rd party software (e.g. Dropbox)

is installed on the UI device.

The section expands to show controls to save and restore PB-4 data.

A drop-down list of known jobs is provided so you can select the jobs whose

data is to be saved. Multiple jobs can be saved at the same time. When the

jobs to be saved have been selected, press the Save Selected Jobs To File

button.

Pressing the Select PB-4 Archive To Restore button will pop-up a file chooser

that lets you select the PB-4 data archive that you wish to load onto the PB-4.

Because all job names must be unique, if the archive file contains any jobs

www.smartavionics.com

Rename the current job

Содержание PB-4















































































Результаты поиска

Содержание PB-4

Отзывы:

Бренды по названию

Популярные бренды

Smart Avionics PB-4, Руководство пользователя интерфейса

Результаты поиска

Содержание PB-4

Отзывы:

Бренды по названию

Популярные бренды