Smart Avionics PB-4 Скачать руководство пользователя

Страница: 23 / 78

second accelerometer is in use) are captured together irrespective of which

axis is currently being displayed.

3.2. Points list

To the right of the polar chart are the Update check box, the point visibility

menu and the points list.

• The Update checkbox controls whether the polar chart is automatically

updated to show the latest polar point(s) returned by the PB-4 when it is

connected. If not checked, the last displayed data is preserved. So if you

want to pause the display, un-check this checkbox.

• The points visibility menu controls which points are displayed in the points

list and the polar chart. The choices are:

All

All points will be displayed. Also, the point index number column

is highlighted and clicking on a point's index number will toggle

its hidden state.

Visible

All points that have not been hidden will be displayed.

Best

Only the “best” point from each group of points is displayed.

The points are grouped by similar capture time and RPM. If

there are less than 3 points in the group, the point with the

lowest IPS value is considered to be the best. When a group

contains 3 or more points, the best point is the point that is

closest to the average position of all the points in the group.

• The points list header row contains three

adjustment columns, Span, Chord

and Pitch.

Fig 3.3. Points List Header - Rotor Mode

Clicking on one of those adjustment columns will open a dialog that allows

you to change the current value of the adjustment.

www.smartavionics.com

Points list

Содержание PB-4















































































Результаты поиска

Содержание PB-4

Отзывы:

Похожие инструкции для PB-4

Бренды по названию

Популярные бренды

Smart Avionics PB-4, Руководство пользователя интерфейса

Результаты поиска

Содержание PB-4

Отзывы:

Похожие инструкции для PB-4

Бренды по названию

Популярные бренды