Smart Avionics PB-4, Руководство пользователя интерфейса

Страница: 18 / 78

becomes the Show This Point button and clicking on it will make the point
visible again.
• The Use As Start Point button designates the current point to be the start
point. A start point is simply a point that was captured before any balance
weights were attached, it represents the propeller balance starting condition.
Once a point has been chosen as the start point, the button becomes the
Don't Use As Start Point button and clicking on it makes the current point
no longer to be considered the start point.
• If the point was captured with acceleration data (see the With Waveform
Data option in Chapter 5 ), the Show/Hide Waveform button will be visible
and clicking that will toggle the display of the waveform.
Fig 2.5. Point details dialog - propeller mode
The text input boxes are:
• The Notes text input box is used to enter any notes that you wish to record
for the point.
• Two rows contain text input boxes that are used to alter the amount and
location (site number) of the balance weights that were present when this
point was captured.
www.smartavionics.com 12
Point details dialog