4X4 HDMI Matrix & WALL System
14
CONTROL USING TCP/IP (continued)
Matrix Mode
: Select the desired input and output and then click Submit. This will set
QWALL-HD to individually change each monitor, allowing the user to create a matrix array of
all the Inputs over all of the Outputs.
Macro Settings
: This page allows the user to actively select and save presets onto the macro
buttons found on the front panel. Button 7 is assigned by Macro 1 and button 8 is assigned
by Macro 2. Simply select a desired preset, assign it to a macro button, and click Submit. This
will allow the user to quickly use any “splicing” preset. Please note that the preset will also
use the latest Input sent to QWALL-HD. Simply use button 1-4 to switch into any Input after
using the macro button.
