SMAR SMART Board 6000S Pro Series Скачать руководство пользователя страница 18

Страница: 18 / 100

Chapter 1

Welcome

smarttech.com/kb/171414

Temperature and humidity sensors

The display features integrated temperature and humidity sensors that enable real-time

measurement and recording of the environmental conditions surrounding the display.

This data is easily accessible using the temperature and humidity app in the display’s App

library.

NOTE

Temperature and humidity sensors are available only when iQ is enabled.

Microphone array

This feature is available only on the SMART Board 6000S (V3) and SMART Board 6000S (V3)

Pro models.

NOTE

The SBID-64xxS (V3) Pro models do not feature a microphone array.

You can use the display's built-in microphone array while using a conferencing app on the display. The

microphone array provides improved sound detection. You can also use the display's built-in microphone

array in place of a connected computer's microphone.

NFC sign in

The display allows you to sign in to your SMART Account using NFC (near field communication): just tap your

SMART ID card on the screen and enter a PIN. This feature helps you save time signing in to your account

without typing your username and password.

This feature will be enabled in iQ system software in 2022.

NOTE

NFC sign in is available only on SMART Board 6000S series displays with iQ. Only SMART ID cards are
supported.

Содержание SMART Board 6000S Pro Series





































































































Результаты поиска

Содержание SMART Board 6000S Pro Series

Отзывы:

Похожие инструкции для SMART Board 6000S Pro Series

Бренды по названию

Популярные бренды

SMAR SMART Board 6000S Pro Series, Руководство по установке и обслуживанию

Результаты поиска

Содержание SMART Board 6000S Pro Series

Отзывы:

Похожие инструкции для SMART Board 6000S Pro Series

Бренды по названию

Популярные бренды