NO
EN
Industry Canada Notice
This device complies with Industry Canada licence-exempt RSS standard(s).
1. Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference
that may cause undesired operation
of the device.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Specifications
Power Supply:
DC 3 V (CR2032 lithium button cell battery x 2)
Standby Current:
< 4 uA
Alarm Current:
< 22 mA
Transmitting Distance:
< 80 m (Open area/no interference)
Radio Frequency:
868 MHz
Housing Material:
ABS plastic
Operation Condition:
Temperature: 0 °C~+55 °C
Relative Humidity: < 80% (non-condensing)
Transmitter Dimensions:
72.5 x 28 x 10 mm
Magnet Dimensions:
58 x 14 x 9.5 mm
Introduksjon
Kontakten inneholder en sender og en magnet, og kan brukes
til dører, vinduer eller andre ting som kan åpnes eller lukkes.
Når senderen og magneten skilles, sender kontakten et
signal til kontrollpanelet, og kontrollpanelet utløser en alarm.
Sabotasjebryteren sikrer at sabotasje, i form av forsøk på å
demontere kontakten, utløser en alarm.
Oversikt
LED-
indikator
Magnet
Forside
Bakside
Sabotasjebryter
Sender
