background image

SMA

 

Technologie AG

Safety Instructions

User Manual

SI3324/4248-14:FE2406

Page 15

3

 

Safety  Instructions

3.1

Important Notes Regarding Operation

Please follow all operating and safety instructions in this manual. Failure to follow
these instructions could result in damage to the inverter and cause personal injury.
Carefully read through the safety instructions 

before

 installing and commissioning

the inverter.

Ensure that the safety instructions and manual are stored in an easily accessible
location.

Opening the inverter, and any

• electrical installation

• repair, maintenance, or

• modification

of the Sunny Island 3324/4248 may only be performed by a
qualified electrician.

Only qualified personnel may alter the settings of the Sunny Island
3324/4248. The settings are protected by the installer password.
All of the instructions in the installation manual must be observed.

Before commissioning the Sunny Island 3324/4248, read the
instructions in the relevant sections of this operating manual
regarding the Sunny Island 3324/4248 and the batteries.

When touching the inverter, please note that some parts of the
Sunny Island 3324/4248 housing heat up during operation. These
temperatures may exceed 60°C. There is a danger of burn injury.

This inverter was NOT developed to power life-sustaining medical
devices. The Sunny Island 3324/4248 may not be used in systems
where a power outage could result in personal injury.

Содержание Sunny Island 3324

















































































Отзывы: