9 Operation
SMA Solar Technology AG
Operating manual
SB55-LV-JP-41-BE-en-13
45
3. Enter the device-specific Wi-Fi password (see WPA2-PSK on the type label of the product or
the rear side of the manual included in delivery).
4. Open the web browser of your end device and enter
https://smalogin.net
in the address
bar.
☑ The login page of the user interface is displayed.
5. If the login page of the user interface does not open, enter the IP address
192.168.12.3
or, if
your end device supports mDNS services,
SMA[serial number].local
or
https://
SMA[serial number]
in the address bar of the web browser.
9.1.3
Establishing a Connection via Ethernet in the local
network
New IP address for connecting with a local network
If the product is connected to a local network (e.g. via a router), the product will receive a new
IP address. Depending on the type of configuration, the new IP address will be assigned
automatically by the DHCP server (router) or manually by you. Upon completion of the
configuration, the product can only be reached via the following access addresses:
• Generally applicable access address: IP address manually assigned or assigned by the
DHCP server (router) (identification via network scanner software or network
configuration of the router).
• Access address for Apple and Linux systems:
SMA[serial number].local
(e.g.
SMA0123456789.local)
• Access address for Windows and Android systems:
https://SMA[serial number]
(e.g.
https://SMA0123456789)
Requirements:
☐ The product must be connected to the local network via a network cable (e.g. via a router).
☐ The product must be integrated into the local network. Tip: There are various methods of
integrating the product into the local network with the aid of the installation assistant.
☐ An end device (e.g. computer, tablet PC or smartphone) must be available.
☐ The end device must be in the same local network as the product.
☐ The respective latest version of one of the following web browsers must be installed: Chrome,
Edge, Firefox or Safari.
Procedure:
1. Open the web browser of your end device. Enter the IP address of the product in the address
bar of the web browser. Then press Enter key.
2.
Web browser signals a security vulnerability
After the IP address has been entered, a message might appear indicating that the
connection to the user interface of the product is not secure. SMA Solar Technology AG
guarantees the security of the user interface.
• Continue loading the user interface.
☑ The login page of the user interface opens.
