SMA STORAGE-67-TS-10 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 52

SMA STORAGE-67-TS-10 Скачать руководство пользователя страница 19

INSTALLATION

19

© SMA Solar Technology AG Subject to changes to the technical content! Version 1.1 Last updated 04/2021

6 Installation

6.1 Disassembly and assembly of the cabinet

Remove the packaging and transport safeguards from the cabinet. The cabinet consists of two halves that are

connected to each other. If necessary for transporting the cabinet to the installation location, the cabinet can be

quickly and easily divided into two halves.

1

First, remove the transport safeguards. To do this, remove the cross-head

screws that connect the cabinet feet on the right and left sides of the

cabinet to the pallet.

2

Then, attach the side cover panels in the base area of the storage sys-

tem using two M 6 x 16 screws.

11 .4

3

Now, disassemble the cabinet connections by removing the six cross-

head screws at the marked points.

4

Remove the crane brackets

1 .2

. The cabinet halves are now separated

and can be moved to the installation location. Connect the cabinet

halves in the reverse order of disassembly described in steps

1

to

3

.

Place the cabinet in its final position pursuant to the specifications for the

installation location in section “3.4 Installation location“ on page 12.

«
...
17
18
19
20
21
...
»

Содержание STORAGE-67-TS-10





















































Отзывы:

Нет отзывов