SMA CLUSTER CONTROLLER, Руководство пользователя

Страница: 59 / 114

11.6 Adjusting the System Identifier for Sunny Portal
In the following cases, you must adjust the system identifier for Sunny Portal in the
Cluster Controller:
• Another communication device (e.g Sunny WebBox) has already sent system data of the
affected system to Sunny Portal.
• You have reset the Cluster Controller to the default settings.
• You have replaced the Cluster Controller with another Cluster Controller.
Procedure:
1. Log into Sunny Portal using the available access data (see the user manual of the
Cluster Controller in Sunny Portal).
2. If there is already a Sunny WebBox in the Sunny Portal system where you wish to integrate the
Cluster Controller, delete the Sunny WebBox from the Sunny Portal system (see user manual of
the Cluster Controller in Sunny Portal).
3. In Sunny Portal, copy the system identifier:
• Select Configuration > System properties .
• Select the tab System data .
• Select [ Edit ].
• Copy the system identifier to the clipboard.
4. Log into the Cluster Controller.
5. Select the Cluster Controller in the system tree and select the menu
Settings in the device
menu.
6. Select the parameter group Sunny Portal > User settings .
7. Select [ Edit ].
8. In the field System identifier , delete the current content and insert the content of the
clipboard.
9. Select [ Save ].
11 Sunny Portal SMA Solar Technology AG
User Manual 59 ClusterController-BA-en-15