background image

Outdoor

The inverter is suitable for outdoor installation.

RAL quality mark for 

solar products

The inverter complies with the requirements of the German 

Institute for Quality Assurance and Labelling.

Certified safety

The inverter is VDE-tested (Association for Electrical, Electronic 

and Information Technologies) and complies with the 

requirements of the German Equipment and Product Safety Act.

Australian mark of 

conformity

The inverter complies with the requirements of the applicable 

Australian guidelines.

Korean mark of 

conformity

The inverter complies with the requirements of the applicable 

Korean guidelines.

Chinese mark of 

conformity

The inverter complies with the requirements of the applicable 

Chinese guidelines.

STP20TLHE-BA-BEN122221 l IMEN-STP20TLHE l Version 2.1

EN

User Manual

SUNNY TRIPOWER 20000TL High Efficiency

SUNNY TRIPOWER 20000TL Economic Excellence

SUNNY TRIPOWER 15000TL High Efficiency

If you have technical problems, first contact your installer. The following information is required in order to provide 

you with the necessary assistance: 

• Inverter device type
• Inverter serial number
• Type and number of the PV modules connected
• Event number and display message on the inverter
• Optional equipment, e.g. communication products
• Confirmation of whether or not a multi-function relay is used

SMA Solar Technology AG

 

Sonnenallee 1
34266 Niestetal, Germany
www.SMA.de

SMA Service Line 

Inverters:   

+49 561 9522 1499

Communication:   +49 561 9522 2499
Fax:  

 

+49 561 9522 4699

E-Mail:    

[email protected] 

Installer Contact

CONTACT

Symbols on the Inverter

Inverter

This symbol defines the function of the green LED. The green LED 

indicates the operating state of the inverter.

Observe the 

documentation

This symbol defines the function of the red LED. The red LED 

indicates a fault. If the red LED lights up, contact your installer.

Bluetooth

This symbol defines the function of the blue LED. The blue LED 

indicates that communication via 

Bluetooth

 is activated.

QR-Code

®

*

By scanning this code, the solar power professional installing the 

inverter can register the inverter and take part in the SMA bonus 

programme.

Danger

There are special requirements for earthing.

* QR-Code

®

 is a registered trademark of DENSO WAVE INCORPORATED.

Symbols on the Type Label

Danger to life due to 

high voltages

The inverter operates at high voltages. All work on the inverter 

must be carried out by skilled persons only.

Risk of burns due to 

hot surfaces

The inverter can become hot during operation. Avoid contact 

during operation.

Observe the 

documentation

Observe all documentation that is supplied with the inverter.

DC

Direct current

Without transformer

The inverter does not have a transformer.

AC

Three-phase alternating current with neutral conductor

Proper disposal

Do not dispose of the inverter together with the household waste.

CE marking

The inverter complies with the requirements of the applicable EC 

directives.

Device class ID

The inverter is equipped with a wireless component and complies 

with device class 2.

IP54

Degree of protection

The inverter is protected against dust deposits in the interior and 

against splashes of water from all angles.

ExPLANATION Of SYMbOLS

GLOSSARY

Bluetooth*

Bluetooth

 is a radio technology that allows the inverter and other communication devices to communicate with 

each other. For Bluetooth communication, the 

Bluetooth

 devices do not need to be within sight of each other.

DC switch-disconnector

The DC switch-disconnector enables the inverter to be safely disconnected from the PV array. The DC switch-

disconnector may be operated by skilled persons only.

Energy

Energy is the power which a system can supply or consume within a certain time unit. Energy is measured in Wh 

(watt hours). If, for instance, your inverter feeds in for half an hour at 3,000 W and half an hour at 2,000 W, it 

will have fed a total of 2,500 Wh into the electricity grid.

Multi-function relay

The multi-function relay is an optional accessory to the inverter. The multi-function relay acts as an interface for 

managing a fault indicator or another external load. Depending on the parameters and measured values, the 

inverter determines when the connected load is switched on and off.

Power

Power is the product of voltage and electrical current strength. Power is measured in W (watts). The power shown 

in the display is an instantaneous value. It indicates the power your inverter is currently feeding into the electricity 

grid.

PV

Abbreviation for photovoltaics.

*The 

Bluetooth

®

 word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of this mark by 

  SMA Solar Technology AG is under licence.

SUNNY TRIPOWER 15000TL Economic Excellence

PV Inverter

Отзывы: