{ Design. Uniqueness. Innovations}
SQ-07MT
+
7” indoor monitor
with touch screen
Quick Installation Guide
ML-15HR
KIT
video outdoor
panel
Step 1
• Take the indoor monitor surface mount bracket and place it 5 ft. up the
floor line.
• Mark and drill four halls in the wall.
• Take four wall anchors from the kit and hammer them into the drilled halls.
• Fix surface mount bracket on the wall by four screws from the kit.
Step 2
• Take the outdoor panel angle bracket and place it 5 ft. up the floor line.
• Mark and drill two halls inside the wall;
• Take two wall anchors from the kit and hammer them into the drilled halls;
• Fix angle bracket on the wall by two screws from the kit;
• Fix wall mounting bracket on the angle bracket by two screws from the kit;
Step 4
• After all communication wires connection, fix indoor monitor and outdoor
panel on the surface mount brackets installed previously.
Step 3
Connect outdoor panel to indoor monitor by 4-wire AWG21 cable according
to the wiring diagram on the next page.
Power
Audio
Ground
Video
Power
Audio
Ground
Video
0 - 165 ft
Power (Red)
Audio (White)
GND (Black)
Video (Yellow)
ML-15HR
SQ-07MT (Master)
Door 1
Door 2
CCTV 1
CCTV 2
Input
Output
Power
TV out
COM (Brown)
N.O. (Blue)
Lock
Lock power
supply
110V
AC
Wiring Diagram
