ENFORCER Outdoor Piezoelectric Request to Exit Pushbutton
4
SECO-LARM U.S.A., Inc
Sample Installation:
Electromagnetic Lock (Fail-Safe) with Strobe Light
Also Available from SECO-LARM:
Electromagnetic
Locks
Request-to-Exit
Plates
No-Touch
Request-to-Exit
RF Wireless
Request-to-Exit
WARRANTY
This SECO-LARM product is warranted against defects in material and workmanship while
used in normal service for a period of one (1) year from the date of sale to the original consumer customer.
SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned,
transportation prepaid, to SECO-LARM. This Warranty is void if damage is caused by or attributed to acts of
God, physical or electrical misuse or abuse, neglect, repair, or alteration, improper or abnormal usage, or
faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating
properly as a result of causes other than defects in material and workmanship. The sole obligation of
SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at
SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or
consequential personal or property damages of any kind to the purchaser or anyone else.
NOTICE
:
The information and specifications printed in this manual are current at the time of publication.
However, the SECO-LARM policy is one of continual development and improvement. For this reason,
SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not
responsible for misprints or typographical errors.
Copyright © 2011 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or
copied, in whole or in part, without the written permission of SECO-LARM.
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.
com
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
E-mail: [email protected]
ENFORCER
Electromagnetic Lock
ENFORCER
LED Strobe Light
MiSD-6x73-SSxQ_1112.docx
PIHWK1
Outdoor Piezoelectric
Request-to-Exit Pushbuttons
Manual
SD-6176-SSVQ
Slimeline plate, manual override
SD-6276-SSVQ
Single-gang plate, manual override
SD-6176-SS1Q
Slimline plate, “EXIT/SALIDA”
SD-6276-SS1Q
Single-gang plate, “EXIT/SALIDA”
SD-6176-SSQ*
Slimline plate, “TOUCH/EXIT”
SD-6276-SSQ*
Single-gang plate, “TOUCH/EXIT”
•
Piezoelectric push buttons for indoor
or outdoor use (IP65).
•
LED ring around button changes from
green to red or red to green when the
button is pressed.
•
Timed or toggle output.
•
Includes separate manual override
button in case power to piezoelectric
push button fails.
•
Relay rated 2A@30VDC with two
individually programmable outputs
(NO/NC).
Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.
*
Special order item. Please contact SECO-LARM.
