Skyworth SKW-T21, Руководство пользователя

Страница: 17 / 30

timer by pressing
4
. If you press
4
again on this event, the timer will be disabled. The set time of
timer is fixed and cannot be modified.
Programming a record timer via the Timer menu
If you want to programme a record timer via the timer menu, press the
BLUE
button from EPG to
open it. You can also select it via the
MENU
button on the remote control in viewing mode, option
Timer in the menu Settings . This way you are free to programme start and stop time. For further
details about this menu, please refer to chapter 7.3.6 Timer in the user manual.
6.7.4 Playback
After a recording has been made you will find a new folder Records created on your external USB
storage device. By pressing u in viewing mode you can access this folder directly. Inside the Records
menu the following functions are supported:
pq
To select a recorded event.
OK Starts playback in preview and again in full screen mode.
3
Stops playback
RED
Opens the option menu to select and deselect for deleting a recorded file(s).
This menu item opens only if you have selected first a file by using
pq
.
Marks a recording for deletion. When all recordings you want to delete are
marked, select
Deleted Selected
press OK . A message will appear to confirm
deleting. By pressing
OK
again the recordings will be permanently deleted
from your external USB storage device. Select Cancel if you don’t want to
delete them or select once more
OK
to definitely delete.
*This user manual describes the full functionality including the recording function and may not be applicable if the
software for recording via USB has not yet been installed (available in our web shop: www.strong.tv).
7.0 MAIN MENU
The main menu gives you access to Installation, Channels, Settings, Multimedia and Network functions.
To access the main menu, press
MENU
in viewing mode. Throughout the main menu, 9 can be used
to get back to the previous screen and  to quit.
7.1 Installation of channels
Use t u to select the main menu item Installation .
Use pq to highlight the submenu of choice and press
OK
to select. These submenus are available:
Manual Search , Auto Search , Information , Factory Settings and Freenet Menu
7.1.1 Manual Search
This menu allows you to search for channels at a specific Frequency or Channel number.
Use
pq
to select Scan mode , and select between Free which will only install Free-to-Air channels or
All . This means that channels that are Free-to-Air or scrambled will be searched and stored.
Use pq to select Channel No and select the channel number of the frequency you’d like to search.
Press
OK
to open a list to make selection faster.
The next option Modulation is to select between Only DVB-T or DVB-T+T2 modulation type.
13