
DVI-300 Installation Manual
Document Rev. 01.004
DOC0456
Page 21 of 31
Restricted Proprietary and Confidential Information
4
DTR
Data Terminal Ready
5
GND
Ground
6
DSR
Data Set Ready
7
RTS
Ready To Send
8
CTS
Clear To Send
9
NC
Do not connect
4.3 ISAT-200 SYSTEM INSTALLATION REFERENCE DRAWINGS
Approved installation drawings from the appropriate STC should be used for the installation of the ISAT-200
System of which the DVI-300 is a component.
Please refer to the ISAT-200 System Installation Reference Drawings (DOC0461) when an STC is not applicable.
4.3.1
DVI-300 INSTALLATION WIRING DIAGRAM NOTES
The following notes pertain, in general, to the DVI-300 Installation Wiring Diagram Illustrations.
All signal and power shield continuity must be individually maintained through bulkhead disconnects.
Please refer to the ISAT-200 System Installation Reference Drawings or STC drawings for additional installation
notes.
IMPORTANT NOTICE
All system interconnect cables must be connected before power is applied to the system.
UNCONTROLLED COPY IF PRINTED