SKY-1001-TH - H
INSTALLATION AND OPERATING INSTRUCTIONS
IF YOU CANNOT READ OR UNDERSTAND THESE INSTALLATION
INSTRUCTIONS DO NOT ATTEMPT TO INSTALL OR OPERATE
INTRODUCTION
This remote control system was developed to provide a safe, reliable and user-friendly remote control system for gas heating appli-
ances.
TRANSMITTER
The transmitter operates on (2) 1.5V AAA batteries. It is recommended that ALKALINE
batteries always be used for this product.
Be sure the batteries are installed with the (+)
and (-) ends facing the correct direction, and are fully charged.
ON
MODE
OF F
BUTTON
WALL CLIP
SLOT
FRON T
B AC K
OF F
SE T
ON
BUTTON
MODE
BUTTON
SE T
BUTTON
BATTERY
COMPARTMENT
KEY SETTINGS
1.
ON
- - -
2.
OFF
- -
3.
MODE
4.
SET
- -
Turns appliance on
Turns appliance off
Cycles control between manual and thermo mode.
Sets temperature in thermo mode.
ON
MODE
OFF
SET
1
2
3
4
LCD - LIQUID CRYSTAL DISPLAY
ROOM
TEMP
1
2
3
SET
4
5
6
1. Display - - - - - - - - - -
2. Fahrenheit or Celsius
3. Flame - - - - - - - - - - -
4. Room - - - - - - - - - - -
5. Temperature - - - - - -
6. Set - - - - - - - - - - - - -
Indicates current room temperature.
Indicates degrees Fahrenheit or Celsius.
Indicates appliance is on.
Indicates remote is in thermo mode.
Appears during manual operation.
Appears
when
setting
the
desired temperature in thermo mode.
TEMP
SETTING ºFAHRENHEIT / ºCELSIUS SCALE
The factory setting for temperature is ºF. To change the displayed
temperature scale, press the
ON
and
OFF
keys at the same time.
Follow this same procedure to return to ºF.
TEMP
TEMP
SCREEN WHILE DEPRESSING
ON
KEY
SCREEN AFTER 3 SECOND
DEFAULT
SCREEN WHILE DEPRESSING
OFF
KEY
SCREEN AFTER 3 SECOND
DEFAULT
MANUAL FUNCTION
ON OPERATION
Press the
ON
key to turn the appliance on. (The
À
ame icon will ap-
pear on the LCD screen).
OFF OPERATION
Press the
OFF
key to turn the appliance off. (The
À
ame icon will
disappear from the LCD screen).
Allparts Equipment Inc 1-877-475-5660 www.allpartsinc.com October, 2011
