INSTALLATION AND OPERATION INSTRUCTIONS
IF YOU CANNOT READ OR UNDERSTAND THESE INSTALLATION INSTRUCTIONS DO
NOT ATTEMPT TO INSTALL OR OPERATE
5301P
This remote control system was developed to provide a safe, reliable, and user-friendly remote control system for gas heating appli-
ances or other compatible appliances. The system can be operated manually from the transmitter.
INTRODUCTION
Review C
OMMUNICATION SAFETY
under
TRANSMITTER
section and
THERMO SAFETY
under
REMOTE RECEIVER
sec-
tion. These signal/temperature safety features shut down the fireplace system when a potentially unsafe condition exists.
MODE
BATTERY
COMPARTMENT
BACK
FRONT
SET
PROG
PROG MODE
SET
TRANSMITTER
1
2
3
4
5
6
7
8
9
10
11
BATTERY ICON
1.
- Battery power is low. Replace Batteries in 2 - 4 weeks.
ROOM
2.
- Indicates CURRENT room temperature.
SET
3.
- Indicates desired SET room temperature for THERMO operation.
FAHRENHEIT/CELSIUS -
4.
Indicates degrees Fahrenheit or Celsius.
FLAME
5.
- Indicates burner/valve in operation.
MODE
6.
– Indicates operation mode of system.
UP and DOWN
7.
– These are used to adjust the Time, Set temperature, and Program functions.
TIME and PROGRAM TIME
8.
– Indicates current time or program time setting when editing pro-
gram settings.
LOCK
9.
- Child lock out.
PROGRAM ON/OFF
10.
– Indicates when Program 1 (P1) is on or off, and indicates when Program
2 (P2) is on or off.
DAY of WEEK
11.
- Indicates current day of week, or program segment when editing program set-
tings.
LCD - LIQUID COLOR DISPLAY
The transmitter operates on 4 AAA 1.5V batteries that are included. Install the bat-
teries supplied with the unit into the battery compartment. It is recommended that
ALKALINE batteries always be used for this product.
Be sure the batteries are
installed with the (+) and (-) ends facing the correct direction.
When you start up the remote, if a low battery signal appears or if they LCD screen
does not illuminate when you touch it, check battery position and if the batteries are
fully charged.
KEY AND TOUCHSCREEN SETTINGS
MODE
1.
- Switches the appliance on/thermo/off.
PROGRAM
2.
- Turns on and off the program function.
SET
3.
- Used in different functions to confirm settings.
UP
4.
and
DOWN
- Used to change the time, set temp, and programming functions.
MODE
SET
PROG
1
1
2
2
3
4
3
REV. 3/5/09 Page 1
