Skytec STM-3012, Руководство пользователя, Страница: 4 / 12

1. Mic: Balanced XLR and TRS connector input socket. For connecting low level signal sources. Such as
microphones or other low impedance devices.
2. Gain : The gain control adjusts the input sensitivity of the Mic.
3. High: Alllows you to control the Hi –range of signals.
4. Mid: Alllows you to control the Mid–range of signals.
5. Low: Alllows you to control the Bass –range of signals.
6. Level : Allows you to adjust the signal level to be sent to the master connection of Hi level sound sources.
7. Talkover : When the switch on ON, the volume of all sources except the mic inputs are lowered by 12dB.
8. Cue select: Allows you to select CHA or CHB to be the headphone.
9. Crossfader: This fader allows the mixing of one source into another.
10. Display : The display indicates either the master output left and right levels.
11. Master : Allows you to adjust the master output level.
12. Cue PGM PAN: By moving this control to the left, you will be able to monitor the assigned cue signal .
Moving to the right will monitor the PGM program output.
13. Headphone Level: Allows you to adjust the headphone output level.
14. BPM Display : There are BPM displays for ch 2 and 3. They update approx. every 3 seconds and digitally
display the beats per min. allowing you to match the beats visually. BPM display reflects the Beats p/m of
channel 2 and 3.
15. Punch: These knobs allows you to cut the signal from each side of the crossfader.
16. USB : To connect to USB Stick.
17. Play/Pause : Each time you press the button the operation changes from play to pause or from pause to
play.
18. I << : Use this button to re-start the track or to select the previous track.
19. >>I : Use this button to select the next track.
20. Channel switch : Allows you to select the channel of signals.
21. Input / Output: RCA connector input/output socket.
23. Power ON : Press the power switch once you have connected all the cables to the equipment.
24. Fuse
25. AC input : To connect to the AC plug. Verify pls the right Main-voltage (220-240Vac/50Hz).
SPECIFICATIONS :
INPUTS
Mic................................................................................................................................................ -60dB / 1kOhm
Phono......................................................................................................................................... -50dB / 47kOhm
Line ............................................................................................................................................ -20dB / 10kOhm
OUTPUTS
Master .......................................................................................................................................... 0dB / 600 Ohm
Rec..............................................................................................................................................-5dB / 600 Ohm
Freq response..................................................................................................................................20Hz~20kHz
THD............................................................................................................................................................ >0.3%
S/N .............................................................................................................................................................>80dB
Talkover........................................................................................................................................................ 12dB
E
lectric products must not be put into household waste. Please bring them to a recycling centre. Ask your local
authorities or your dealer about the way to proceed.
The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be
changed without prior notice.