Instruction Manual
SK - 100184
eN18 NiMH Battery Charger
V1.0
INTRODUCTION
Congratulations on your choice of SkyRC eN18 charger.
eN18 is an easy-operation charger for 4-8S NiMH battery. It will start charging
once you insert the battery. Please read the instructions carefully before using.
LED STATUS EXPLANATION
USING THE CHARGER
SPECIFICATION
Bi-Color LED: status at a glance
Reverse polarity protection
Easy operation: universal-voltage input
Short circuit protection
LED Status
Flashes GREEN
Steady GREEN
Charging Status
Charging
Fully charged
Input:
AC100V-240V 50/60Hz
Battery Type:
NiMH
Output Voltage:
4.8V-14.4V
Output Current:
1.2A
Output Power:
18W Max.
Battery Cell:
4-8S
Output Cable Length:
70cm
Size:
85mm×50mm×54mm
FEATURES
OUTPUT CONNECTOR*
Net Weight:
120g
Operating Temperature:
0℃-40℃
（32℉-104℉）
Relative Humidity:
5%-75%
Storage Temperature:
-10℃ - 70℃
（14°F-158°F）
Storage Humidity:
5%-75%
LED Status
Steady RED
Flashes RED*
Charging Status
Standby
Error
If the LED flashes RED, it should be that the battery is connected reversely,
over-discharged, or could not reach the specified voltage, or the battery
cells are not applicable. If you doubt that the connection is reversed,
please remove the battery immediately and check the battery polarity.
*
*Please disconnect the battery and the AC power source when fully charged.
Status
Indicator
NI-MH Battery
or
Tamiya Male
Deans Male
Optional Parts
Deans Female
to Tamiya Male
SK-600023-17
Tamiya Female
to Mini Tamiya Male
SK-600023-18
LED stays in steady RED
Standby
LED flashes GREEN
Charging
*The specific input converter
type refers to the actual SKU
description.
DO NOT attempt to charge LiPo batteries.
IT WILL CAUSE FIRES!
1. Connect the charger to the wall socket. The LED will be steady RED, reflecting
it is on standby.
2. Connect the battery; the charger will start charging automatically with LED
flashing in GREEN.
3. When fully charged, the LED will stay in steady GREEN.
The charging cables is not included in
the package. You need to purchase
them separately.
* The specific connector
refers o the actual SKU
description.
Detachable
Input Converter
